60 78 104 D 3488
26
D 3488.201.01.07.02
11.2009
6 Operation
Operating Instructions SIROEndo
Automatic motor stop
¾
Press the "Cal" key briefly
.
ª
If the "Cal" key is pressed briefly, an asterisk appears next to the apex
locator stripe. This indicates that the motor, if it is running, will stop on
reaching the apex (foramen apicale).
In case of ambiguities, see chapter 9 for
"What should I do if..."
.
Automatic motor stop and auto reverse on reaching
the apex
¾
Press "Cal" briefly again (
**
bottom left on display).
ª
The micromotor stops on reaching the apex. If you then release the foot
switch and actuate it a second time, the motor will run counterclockwise to
exit the canal.
If you then release the foot switch again and press it down one more time,
the motor will run clockwise again.
6.4
Special functions
Loading the manufacturer settings/
RESET:
Press the "System
Ç
" key while switching the SIROEndo on or press and hold
it for 1 second during the welcome screen display.
Loading a new software update:
Plug the SIROEndo software stick into the USB port. Wait for 3 seconds.
Then press the "Load" key, hold it down and switch the unit on. The following
display reading appears:
Please wait until the usual reading reappears on the display.
Switch the unit off with the "Power" key and remove the SIROEndo software
stick.
After switching the unit on, press "System
↑
“ for a longer period of time to load
the manufacturer's settings.
The unit is now ready for operation again.
NOTE
i
If you have saved an individual file assortment to the memory stick, please de-
lete it (cf. section 6.2: Deleting the individual file assortment).
Restoring a previous software version:
Plug the SIROEndo software stick into the USB port. Wait for 3 seconds.
Then press and hold the “Rev“ key and switch the unit on.
Wait until the familiar display appears again.
*
.
.
..
.
..
.
..
.
.
.
.
..
.
.
Cal
Cal
*
.
...
...
.
..
..
.
....
.
*
========================
Erasing
========================
Old Software
Old Software
