Sirius XM RAdio Starmate 8, Руководство пользователя

Страница: 30 / 88

30
trim near the front of the cabin and route it under the carpet toward the
dashboard or console . Coil any excess cable in a hidden location, such as
under the carpet, keeping it away from any vehicle pedals or controls .
Secure the excess cable with wire ties (purchased separately) .
4. Bring the end of the cable out at the Power Connect Vehicle Dock location .
Leave yourself enough cable so you can easily connect it to the antenna
connector of the dock .
5. Continue with “Step 5: Connect the Magnetic Mount Antenna and
Power Connect Power Adapter” on page 33 .
Convertible
1. Bring the antenna cable from the antenna into the trunk at the front edge of
the trunk lid . Keep any bends in the cable loose . Tape or tie the cable along
the inside of the trunk lid to the trunk lid hinge strut .
2. Allow enough slack in the cable so the trunk lid can easily open and close and
keep the cable away from hinges, gears, etc ., that could crimp or cut it . Route
the cable along the trunk wall and into the cabin through a conduit or along an
existing wiring harness .
3. Route the cable through the main cabin
area under the interior trim, towards the
front of the vehicle . Use a blunt plastic
putty knife or similar blunt tool to lift the
plastic trim just enough to tuck the cable
under underneath . Avoid side airbag
locations on back pillars and above the
doors . Airbag locations are marked with
“SRS” logos . Be careful not to crimp or
cut the cable .
Vehicle Installation