Sirius XM RAdio Starmate 8, Руководство пользователя

Страница: 28 / 88

28
5.
Bring the cable out from the trim near the front of the cabin and route it
under the carpet toward the dashboard or console . Coil any excess cable
in a hidden location, such as under the carpet, keeping it away from any
vehicle pedals or controls . Secure the excess cable with wire ties (purchased
separately) .
6. Bring the end of the cable out at the Power Connect Vehicle Dock location .
Leave yourself enough cable so you can easily connect it to the antenna
connector of the dock .
7. Continue with “Step 5: Connect the Magnetic Mount Antenna and
Power Connect Power Adapter” on page 33 .
Sedan/Coupe With Antenna Placed at the Front of the Roof
1. Feed the antenna cable from the antenna underneath the rubber molding
around the windshield . Use a blunt plastic putty knife or similar blunt tool
to lift the rubber molding around the windshield and tuck the antenna cable
underneath the molding . Route the antenna cable around and down the
windshield to the lowest point .
2. At the lowest corner of the windshield, route the cable out of the windshield
molding and into the rubber weather stripping around the door opening . Lift
the weather stripping from the opening and tuck the cable inside it, then
replace the weather stripping . Run
the cable inside of the weather
stripping to the bottom of the door
opening .
3. Pull the cable out of the weather
stripping at the bottom of the door
opening and route it under the
carpet toward the dashboard . Coil
Vehicle Installation