Streamer GTR SIR-GTRV1 Vehicle Kit Installation Guide
4
Installing the SIR-GTRV1 Custom Vehicle
Installation Kit
Professional installation of this product is
recommended by Brix Labs.
There are two choices for mounting the Receiver:
• Suction cup mount
• In-dashboard mount
The instructions for mounting the suction cup mount
are found in the SIR-GTRC1 Streamer GTR user
guide. The instructions for mounting the antenna
are also found in the SIR-GTRC1 Streamer GTR
user guide.
Mounting the Receiver: In-Dashboard
Mount
The in-dash mount may be used in vehicles which
provide an opening in the dashboard for this
purpose. Place the in-dash mount in the dashboard
opening and snap it into place by gently pushing it
into the opening on the four corners.
Before placing the Receiver into the in-dash mount,
the wiring to the Receiver should be installed.
Refer to the wiring diagram before proceeding with
the remainder of the Receiver installation. The
wiring should be routed so that the wires meet the
Receiver at the left side for easy attachment to the
Receiver.
When the wiring has been connected to the
Receiver, it may be positioned into the in-dash
mount. Line the Receiver up with the in-dash mount
and slide the left side of the Receiver into the in-
dash mount, making sure the wires connected to
the Receiver push behind the in-dash mount at the
