8 / 14
3. Stereo Input Channels
1.Monitor Outputs
These are balanced jack sockets.
2.AUX OUT (1&2)
These are balanced jack sockets for AUX 1&2.
3.Stereoeingänge
These are balanced TRS jack sockets.
4.GAIN
The Gain controls the level of the channel signal.
5.Equalizer
HF: Turn to the right to boost high (treble) frequencies above
12kHz (Cymbals, vocals, electronic instruments) by up to 15dB.
Turn to the left to out by up to 15dB. Set the control in middle
position when not required.
LF: Turn to the right to boost low (bass) frequencies below 60Hz
by up to 15dB. Turn to the left to cut low frequencies by up to
15dB. Set the control in middle position when not required.
6. AUX Sends
These are used to set up separate mixes for monitor mixes, effects
or recording. The combination of each AUX Send is mixed to the
respective AUX output.
7.PAN
This control sets the volume distribution to the R and L channels
.
If
the controller is set to the middle position, both sides get the same
signal component. By turning clockwise, the signal component of
R is increased, counterclockwise for L.
8. MUTE
This button deactivates the respective channel.
9.Peak
This LED lights, when the signal is “clipping”.
