Registered in England No. 08405712
VAT Registration No. GB163 04 0349
Siretta Ltd
Basingstoke Road
Spencers Wood
Reading
Berkshire RG7 1PW
sales
fax
email
web
+44(0)118 976 9000
+44(0)118 976 9020
www.siretta.com
23
SNYPER-LTE+ Family
User Manual
System:
The System function is used to operate the SNYPER in
various modes, giving the user more information on the surveys.
Mode:
The SNYPER can report results in Standard, Advanced or
Engineer mode. See ‘Mode’ section
below
.
ITU Region:
This setting is required in engineering mode to ensure
DL and UL frequencies are correctly calculated.
Debug Log:
The debug information is used by Siretta Engineering
team, this can be turned ON or OFF.
Default: Mode = Standard, ITU Region = EMEA (1), Debug Log =
Off
Set Time:
Date and time can be set using the UP/DOWN buttons.
Date:
YYYY\MM\DD
Time:
HH\MM\SS
Factory Reset:
Resets the SNYPER to factory settings.
NOTE:
Performing factory reset will delete all saved files from the
SNYPER’s internal memory.
Mode
The ‘Mode’ option determines the operation mode of your SNYPER when performing
a survey. There are 4 options: Standard, Advanced, Engineer or Debug - each will
display a different range of results once a survey has been performed.
Standard Mode
- Standard mode receives and displays a basic range of results and
is the factory default operation mode.
Advanced Mode
- Advanced mode receives and displays a more advanced range of
results in addition to the results displayed in Standard mode.
Engineer Mode
- Engineer mode receives and displays a more advanced range of
results in addition to the results displayed in Standard and Advanced mode.
Debug Mode
- Debug mode for the SNYPER.
NOTE:
ONLY USE THIS MODE WHEN INSTRUCTED BY SIRETTA SUPPORT.
See
table 6
over page for breakdown of information provided.
