TI01-2ENG-REV13
3 of 8
Control Panel
Indicator Lights
RED: High Voltage Ready
YELLOW: Low Battery
GREENs: Voltage LEDs
indicate the strength of the
voltage output
Voltage Control
Adjusts voltage level
Power Switch
Push-Button ON/OFF
Unit Base
Battery Access
Release Latch and instruc-
tion label for
operation of unit
Serial Number
For unit registration
Brass Electrodes
(1) Positively Charged
(2) Negatively Charged
Explanation
of LEDs
RED
High Voltage Ready
will light when an electrical path has been established
between the pickup mat and the ground plate.
GREEN Voltage LED’s
indicate the strength of the voltage output. If no LEDs are lit
then no High Voltage is applied. One LED indicates approx. 4000 volts. Each ad-
ditional LED indicates an additional 1000 volts until the max. of 7 LEDs are lit repre-
senting 11,000 volts.
YELLOW Low Battery LED
will illuminate shortly before battery life expires. Battery life
varies with use. A fresh 9V alkaline battery will provide about 150-200 lifts using a 15 sec-
ond charging cycle. (See Battery Installation.)