Siqura IFD820 Series, Руководство по установке, Страница: 18 / 28

IFD820 Series
Page 16
9. Connect the ports on the camera module with their cables/wires respectively, as shown
below.
10. Attach the snap-on camera module into/ on the dome camera’s housing/plate , and screw
the module-fastened screw tightly with the screw driver to secure the camera module.
11. Connect the power and network outputs.
Note:
The power cable is omitted if using PoE.
12. Access the camera browser-viewer for viewing images. Please refer to the Siqura IFD820's
user manual for further details. Users can also use the camera’s BNC connector for video
output.
13. Adjust the Siqura IFD820's lens and adjust the its zoom level and focal length via the zoom
and focus ring screws.
Note:
The zoom level and focal length might be different with the dome cover on. In this
case, we recommend adjusting zoom level and focal length through the dome cover.