17
Installation
6.2. 4S Mount Electrical Box
Before installing the dome camera in the electrical box, unscrew and remove the housing
cover with the hexagon tool.
Figure 6.3 4S Mount electrical box
To install using a 4S Mount Electrical Box
1.
Disconnect the terminal block of power
and video wires from the dome
camera. Then connect the power and
video wires to the existing cables in
the wall.
2.
Disassemble the inner plastic cover
from the dome unit.
3.
Detach the snap-on module from the
dome housing.
4.
Connect the power and video outputs.
Then fasten the dome housing to the
electrical box with the two screws.
5.
Attach the snap-on module into the
dome housing, and then connect the
terminal block of power and video
wires to the dome camera, as shown in
the figure.
