Siqura CD820F1, Руководство по установке

Страница: 12 / 20

CD820 Series
Page 12
4.2 Interface Requirements
The CD820 camera can be accessed and configured from a standard web browser supporting
ActiveX controls. The browsing PC must meet the system requirements described in the table
below.
Items Minimum Requirements
Personal Computer
1
Intel Pentium M, 3 GHz or higher
2 Intel Core2 Duo, 2 GHz or higher
3 2 GB RAM or higher
Operating System Windows Vista or XP
Web Browser Microsoft Internet Explorer 6.0 or later
Network Card 10Base-T (10 Mbps) or 100Base-TX (100 Mbps) operation
Viewer ActiveX control plug-in for Microsoft IE
4.3 System Compatibility
To ensure system compatibility, download the latest firmware at http://www.siqura.com/.
4.4 Power over Ethernet Cable Connection
The CD820 uses Power over Ethernet (PoE), which requires that IEEE 802.3af Power Sourcing
Equipment (PSE) is available on the network. The use of Cat 5 Ethernet cable is recommended
for network connection. For the best transmission quality, limit the cable length to no more than
100 meters.
Connect one end of the Ethernet cable to the camera's RJ-45 connector and the other end of the
cable to the IEEE 802.3af network switch or PC. The CD820 consumes 3.8W of power.
Note:
In some cases, you may need to use an Ethernet crossover cable when directly connecting
the CD820 to a PC.
4.4.1 RJ-45 connectors
A waterproof cable and RJ-45 connector are attached to the CD820 camera. Follow the
instructions in this section to complete the IP camera connection.
The CD820's waterproof RJ-45 connection