DRAFT
© 2003 - 2005 Sipura Technology, Inc
Proprietary (See Copyright Notice on Page 2)
40
This field sets the blinking pattern of the LED. The 4 choices are:
nb = no blink (steady on or off)
sb = slow blink (1s on and 1s off)
fb = fast blink (100ms on and 100ms off)
ud = user-defined (according to the contents of the u field)
u=on/off/on/off...
This is a user-defined blinking pattern used only when p = ud. It consists of up to 4 pairs of on/off duration
in seconds with up to 2 deciaml places; each value is separated by a forward slash (/).
Example 1:
c=r;p=sb
Color is red and slow blink
Example 2
: c=o
LED is off
Example 3
: c=g
Color is green and steady on
Example 4
: c=a;p=ud;u=.1/.1/.1/.1/.1/.9
Color is amber and blink with the pattern (100ms on, 100ms off, 100ms on, 100ms off,
100ms on, 900ms off).
DirEntry
– A script that describes a directory entry
Syntax: n=
name
;p=
phone
;r=
ring-tone-id
name
is the name of the entry
phone
is the phone number or URL of the entry
ring-tone-id
is the ID of the ring tone (1–10) that should be played when the entry is called.
Example 1:
n=Joe Smith;p=14089991234
(ring-tone = default)
Example 2
: [email protected]:5061;r=5
(unknown name)
ProvisioningRuleSyntax
– Scripting syntax used to define configuration resync and firmware upgrade
rules. Refer to the provisioning discussion for an explanation of the syntax.
DialPlanScript
– Scripting syntax used to specify line 1 and line 2 dial plans. Refer to the dial plan
section of this document for an explanation.
