DRAFT
© 2003 - 2005 Sipura Technology, Inc
Proprietary (See Copyright Notice on Page 2)
34
•
A configuration file (e.g. SPA841.cfg). This file provides the specific parameter values for the
administrator’s network. Many of the remaining sections explain the details on the configuration
file i.e. the configurable parameters, their values, how to edit the parameters, how to load the
configuration file securely and remotely.
Both files can be loaded to the device remotely using TFTP, HTTP or HTTPS. The configuration file can
be manually accessed and changed using the phone’s web server and that web interface is explained in
the next section.
Note: In this document, Configuration refers to the parameter values of the configuration file. Provisioning
refers to preparing the device with the correct configuration and firmware files for the network
implementation.
9
Web Interface Administration and Security
The SPA provides a built-in web server. Configuration and administration can be performed through this
convenient web interface.
Web Interface Conventions
The SPA uses the following conventions with the web administration capabilities:
•
The SPA web administration supports two privilege levels: Administrator and User. To use the
User privilege, simply point a web browser at the IP address of the SPA; to use the administrator
privilege, use URL http://<IP_Address_Of_SPA>/admin/.
•
Version 1.0 of the SPA supports Internet Explorer 5.5 and above and Netscape 7.0 and above.
•
The web configuration pages can be password protected. See 0 for more information about
password protect.
The user name of web Administrator is :
admin
The user name of web User is :
user
Note
: The user names for both administrator and User are fixed and cannot be changed.
After making changes to SPA configuration parameters, pressing “
Submit All Changes
” button will apply
all the changes and if necessary, automatically reboot the device. Multiple changes may be made on
multiple page tabs of the web interface at the same time. Pressing “
Submit All Changes
” will apply all
the modifications.
Important Note
: switching between page tabs won’t apply the changes to SPA, The only way to apply
the changes is to press the “
Submit All Changes
” button.
If the “
Undo All Changes
” button is clicked, any modifications to profile parameters
on any and all pages
will be reset back to their original values before modification.
NOTE
: Pressing the “
Undo All Changes
” has no effect on the SPA; it will only reset the values on the
web page.
Web Interface Administration Privileges
The SPA supports two levels of administration privileges: Administrator and User, both privileges can be
password protected.
Important note
: by factory default, there are no passwords assigned for both
Administrator and User.
