SIP CW2300 Скачать руководство пользователя страница 13

•  Vibrazioni trasmesse all’utilizzatore • Arm vibrations

1,5 m/s

2

K (uncertainty) 
0,5 m/s

2

• SIP warrants its products for 12 months from the date 

of purchase.

• In accordance with the above-mentioned terms, SIP 

agrees to furnish free of charge any replacement parts 

for such parts as, in the Manufacturer's opinion or that 

of their authorized representative, are defective either 

in material or manufacture. In any case transport and 

labour costs shall be charged to the customer. 

• The product returned to SIP or authorized represen-

tative for warranty inspection or repair must be sent 

back together with each single part the unit is com-

plete with and must not have been improperly dama-

ged. SIP will otherwise decline all responsibility for any 

warranty claims. 

• The warranty does not include any payment for faults 

due to incorrect usage by the operator and for parts 

falling within the usual maintenance, such as: Gaskets, 

diaphragms sealing rings, oil and so on. 

• The Manufacturer shall not be held responsible for 

accidents to the operator or third parties while the 

equipment is in use. 

• This warranty shall not be valid if:

a) previous service or repairs were performed by 

unauthorized 

individuals or companies.

b) the equipment was previously repaired with non-

original parts. 

• Breakdowns and failures in our machines during or 

after the warranty period, do not grant any right to 

suspend payments for the goods delivered which 

have already been agreed to. Nor can such bre-

akdowns and failures be used to excuse further delay 

in such payments. 

• The Manufacturer reserves the right at any time 

to carry out any and all changes to improve his pro-

ducts. Nor shall he be obliged by this to add such im-

provements to units previously manufactured, alrea-

dy consigned or in the process of installation. 

• These general conditions of warranty hereby substi-

tute and nullify every previous condition expressed 

or implicit.

WARRANTY CONDITIONS 

13

Содержание CW2300

















Отзывы: