SIP CW2300 Скачать руководство пользователя страница 10

EN

10

The cleaner can only be connected to the water 

mains if the water mains is separated by a back-

flow preventer. Make sure that the hose is at least Ø 

13mm-1/2 inch and that it is reinforced.

 WARNING: Water that has flown through 

backflow preventers is considered to be 

nonpotable.

IMPORTANT: Only clean or filtered water should 

be used for intake. The delivery of the water 

intake tap should be equal to the double of the 

maximum pump range. 

-    Minimum delivery rate: 15 l/ min.

-    Maximum intake water temperature: 40°C

-    Max inlet water pressure: 1Mpa

Place the cleaner as close to the water supply system 

as possible.

Water supply from an open container

-  Unscrew the coupling part for the water inlet.

-  Screw the suction hose with filter (not included) 

onto the water connection of the unit.

-  Hang the filter in the container.

-  Vent the unit before operation.

- Unscrew the high-pressure line at the high-

pressure outlet of the unit.

-  Switch on the unit and let it run until water free of 

bubbles emerges at the high-pressure outlet.

-  Switch off the unit and screw on the high-pressure 

hose again. 

Failure to comply with the above conditions causes 

serious mechanical damage to the pump and the 

loss of warranty cover.

>  ELECTRICITY SUPPLY

- The appliance’s electrical connection must 

comply with the IEC 60364-1 standard.

 IMPORTANT: Before connecting the 

appliance, make sure that the nameplate data are 

the same as those of the electrical mains and that 

the socket is protected by a differential security 

breaker with tripping sensitivity below 0.03 A - 30 

ms.

-  If the appliance’s plug is not compatible with the 

socket, have the socket replaced with another of 

suitable type by professionally qualified staff.

-  Never use the appliance in ambient temperatures 

below 0° C if it is equipped with a PVC (H VV-F) 

cable.

 XY  WARNING:  Inadequate extension cords can 

be dangerous.

 XJ  WARNING: If an extension cord is used, 

the plug and socket must be of watertight 

construction. 

   Information for supply may also be obtained 

from the plug manufacturer.

<16 A

<25 A

<20 m 

ø 1,5 mm

2  

- 14 AWG ø 2,5 mm

 - 12 AWG

20 m - 50 m ø 2,5 mm

 - 12 AWG ø 4,0 mm

 - 10 AWG

>  PLUG

HOW TO CONNECT THE CORD TO A U.K. PLUG: 

IMPORTANT The wires in the mains lead are 

coloured in accordance with the following code:

 

Blue 

  Neutral

 

Brown 

  Live

 Yellow/Green   

Earth

Please read the instructions given below before con-

necting the cord to a plug. If in doubt please consult 

a qualified electrician. As the colours of the wires in 

the mains lead of this appliance may not correspond 

with the coloured markings identifying the termi-

nals in your plug, proceed as follows:

The wires that is coloured Brown must be connected 

to the terminal which is marked with the letter L or 

coloured Red. The wire that is coloured Blue must be 

connected to the terminal which is marked with the 

letter N or coloured Black.

Safety points for rewireable or moulded plug:

The mains lead of this appliance may be already 

fitted with a BS1363 13A plug.

-  If your socket outlet is not suitable for the plug, 

then the plug must be removed (cut off if it is a 

moulded on plug), the flexible cord insulation 

should be stripped back as appropriate and a 

suitable 3 pin plug fitted.

 

WARNING: Dispose of 

a plug that has been 

cut from the power 

supply cord, as such 

a plug is hazardous 

if inserted in a live 

13A socket outlet 

elsewhere in the 

house. 

 

Should the fuse 

need to be replaced 

an ASTA marked fuse, 

approved to BS1362, of the same rating must be 

used. 

 -  Always replace the fuse cover after fitting a fuse. 

Содержание CW2300

















Отзывы: