24
PARTS LIST 07628
Ref. No.
Description
Sip Part No. Ref. No.
Description
Sip Part No.
1.
Screw M5x18
WK05-00095
27.
Mains lead
WK05-00118
2.
Left wheel cover
WK05-00141
28.
Right spark arrestor
WK05-00119
3.
Nut (16mm left)
WK05-00142
29.
Right eye shield arm
WK05-00120
4.
Outer flange
WK05-00143
30.
Eye shield
WK05-00151
5.
Coarse wheel 36 grit
(200 x 25 x 15.8)
WK05-00144
31.
Right tool rest
WK05-00122
6.
Screw M5x10
WK05-00098
32.
Right cover plate
WK05-00152
7.
Left wheel guard
WK05-00145
33.
Fine wheel 60 grit
(200 x 25 x 15.8)
WK05-00153
8.
Left spark arrestor
WK05-00100
34.
Nut (16mm right)
WK05-00154
9.
Washer 5mm
WK05-00101
35.
Right cover
WK05-00155
10.
Spring washer 5mm
WK05-00102
36.
Mains lead grommet
WK05-00125
11.
Screw M5x8
WK05-00103
37.
Lock washer
WK05-00126
12.
Bolt M5x20
WK05-00104
38.
Screw M4x8
WK05-00127
13.
Nut 5mm
WK05-00105
39.
Base
WK05-00128
14.
Left tool rest
WK05-00106
40.
Strain relief bush
WK05-00129
15.
Washer 5mm (big)
WK05-00107
41.
Capacitor 10mf
WK05-00188
16.
Lock knob
WK05-00187
42.
Capacitor support
WK05-00131
17.
End cap
WK05-00146
43.
Nut 8mm
WK05-00132
18.
Bolt M6x14
WK05-00109
44.
Screw M4x8
WK05-00133
19.
Washer 6mm
WK05-00110
45.
Rubber foot
WK05-00134
20.
Bracket
WK05-00111
46.
Bottom cover
WK05-00135
21.
Left eye shield arm
WK05-00112
47.
Bolt M8x22
WK05-00136
22.
Eye shield holder
WK05-00113
48.
Screw M5x16
WK05-00137
23.
Spring washer
WK05-00147
49.
NVR switch KJD18
WK05-00138
24.
Bearing
WK05-00148
50.
Inner flange
WK05-00156
25.
Stator
WK05-00149
51.
Wire wheel
WK05-00157
26.
Rotor
WK05-00150
52.
Washer for wire wheel
WK05-00158
5
locked cupboard wherever possible and out of the reach of children.
WEAR THE CORRECT CLOTHING:
Do not wear loose clothing, neckties, rings, bracelets,
or other jewellery, which may get caught in moving parts. Non-slip footwear is recom-
mended. Wear protective hair covering to contain long hair. Roll long sleeves up
above the elbow.
USE SAFETY GOGGLES AND EAR PROTECTION ETC:
Wear CE approved safety goggles
at all times, normal spectacles only have impact resistant lenses, they are
NOT
safety
glasses. A face or dust mask should be worn if the operation is dusty and ear protec-
tors (plugs or muffs) should be worn, particularly during extended periods of operation.
PROTECT YOURSELF FROM ELECTRIC SHOCK:
When working with power tools, avoid
contact with any earthed items (e.g. pipes, radiators, hobs and refrigerators, etc.). It is
advisable wherever possible to use an RCD (residual current device) at the mains
socket or supply board.
STAY ALERT:
Always watch what you are doing and use common sense. Do not oper-
ate a grinder when you are tired or under the influence of alcohol or drugs.
DISCONNECT THE TOOL FROM THE MAINS SUPPLY:
When not in use, before servicing
and when changing accessories such as wheels.
AVOID UNINTENTIONAL STARTING:
Make sure the switch is in the
OFF
position before
connecting the grinder to the mains supply.
NEVER LEAVE THE TOOL RUNNING / CONNECTED WHILST UNATTENDED:
Turn off the tool
and disconnect it from the mains supply between jobs. Do not leave the machine
until it comes to a complete stop.
DO NOT ABUSE THE MAINS LEAD:
Never carry or move the grinder by the mains lead or
pull it to remove the plug from the mains socket. Keep the mains lead away from
heat, oil and sharp edges. If the mains lead is damaged, it must be replaced by the
manufacturer or its service agent or a similarly qualified person in order to avoid un-
wanted hazards.
CHECK FOR DAMAGED PARTS:
Before every use of the grinder, a guard or other part
that is damaged should be carefully checked to determine that it will operate correct-
ly and perform its intended function. Check for alignment of moving parts, free run-
ning of moving parts, breakage of parts, and any other conditions that may affect its
operation. A guard or other part that is damaged should be correctly repaired or re-
placed by an authorised service centre unless otherwise indicated in this instruction
manual. Have defective switches replaced by an authorised service agent. Do not
use the tool if the switch does not turn it on and off.
KEEP ALL GUARDS IN PLACE:
And in full working order.
MAINTAIN TOOLS WITH CARE:
Keep tools sharp and clean for the best and safest per-
formance. Follow instructions for lubricating and changing accessories. All extension
cables must be checked at regular intervals and replaced if damaged.
USE ONLY RECOMMENDED ACCESSORIES:
Consult this user manual for recommended
accessories. Follow the instructions that accompany the accessories. The use of im-
proper accessories may cause hazards and will invalidate any warranty you may
SAFETY INSTRUCTIONS...cont
