10
These SIP Bench Grinders are covered by a 12 month parts and labour warranty cover-
ing failure due to manufacturers defects. This does not cover failure due to misuse or
operating the grinders outside the scope of this manual - any claims deemed to be
outside the scope of the warranty may be subject to charges Including, but not lim-
ited to parts, labour and carriage costs. Consumable items such as grinding wheels
are not covered by the warranty.
In the unlikely event of warranty claims, contact your distributor as soon as possible.
Note:
Proof of purchase will be required before any warranty can be hon-
oured.
1. Bench Grinder c/w 2 x Grinding Wheels (not pictured).
2. Spark Arrestor x 2 (inc. fixings).
3. Eye Shield Assembly x 2 (1 x Left & 1x Right).
4. Tool Rest Assembly x 2 (inc. fixings).
5. Instruction Manual (not pictured).
GUARANTEE
CONTENTS AND ACCESSORIES
07625 & 07628
2
3
4
19
MAINTENANCE….cont
Inner Flange Outer Flange
Shaft Wheel Nut
Blotter Blotter
REPLACING THE GRINDING WHEELS 07645
Loosen and remove the 4 guard retaining screws and nuts (Fig. 14).
Remove the side guard.
Warning!
Always ensure that the replacement wheel is of the correct size and rated
for the speed of the grinder as stated in the specifications.
Warning!
Always ensure that a ’blotter’ (cardboard disc between the flange and the
grinding wheel) is fitted either side of the grinding wheel.
Screws
Fig. 14
Fig. 13
Note:
Do not over tighten the retaining nut; it needs to be tight enough to
hold the grinding wheel, but not so tight so that it damages the flanges.