32
EXPLODED DIAGRAM WELDMATE T166 MIG
5
SAFETY INSTRUCTIONS….cont
should be kept at a safe distance from the work area.
STORE THE MIG WELDER SAFELY WHEN NOT IN USE:
The mig welder should be stored in
a dry location and disconnected from the mains supply, and out of the reach of chil-
dren.
USE SAFETY CLOTHING / EQUIPMENT:
Use a CE approved welding mask at all times with
the correct shade of filter lens. A fume extractor should be used particularly where
there is little or no ventilation.
PROTECT YOURSELF FROM ELECTRIC SHOCK:
When working with the mig welder, avoid
contact with any earthed items (e.g. pipes, radiators, hobs and refrigerators, etc.). It is
advisable wherever possible to use an RCD (residual current device) at the mains
socket.
STAY ALERT:
Always watch what you are doing and use common sense. Do not oper-
ate the mig welder when you are tired or under the influence of alcohol or drugs.
DISCONNECT THE MIG WELDER FROM THE MAINS SUPPLY:
When not in use and before
servicing.
AVOID UNINTENTIONAL ARCING:
Make sure the switch is in the
OFF
position before con-
necting the mig welder to the mains supply.
NEVER LEAVE THE MIG WELDER CONNECTED WHILST UNATTENDED:
Turn the mig welder
off and disconnect it from the mains supply between jobs. Do not leave the mig weld-
er connected to the mains supply if no more welding is to be done.
DO NOT ABUSE THE MAINS LEAD:
Never attempt to move the mig welder by the mains
lead or pull it to remove the plug from the mains socket. Keep the mains lead away
from heat, oil and sharp edges. If the mains lead is damaged, it must be replaced by
the manufacturer or its service agent or a similarly qualified person in order to avoid
unwanted hazards.
All
extension cables must be checked at regular intervals and re-
placed if damaged.
CHECK FOR DAMAGED PARTS:
Before every use of the mig welder, any damage found
should be carefully checked to determine that it will operate correctly, safely and per-
form its intended function. Any damaged, split or missing parts that may affect its op-
eration should be correctly repaired or replaced by an authorised service centre un-
less otherwise indicated in this instruction manual.
KEEP ALL PANELS IN PLACE:
Never operate the mig welder with any panels removed,
this is extremely dangerous.
MAINTAIN THE MIG WELDER WITH CARE:
Keep the earth clamp and mig torch clean for
the best and safest performance.
USE ONLY RECOMMENDED ACCESSORIES:
Consult this user manual, your distributor or
SIP directly for recommended accessories. Follow the instructions that accompany the
accessories. The use of improper accessories may cause hazards and will invalidate
any warranty you may have.
SECURE THE WORK-PIECE:
Always use welding clamps to secure the work piece. This
frees up both hands to operate the mig welder correctly.
DO NOT OVERREACH:
Keep proper footing and balance at all times.
USE THE RIGHT TOOL:
Do not use the mig welder to do a job for which it was not de-
