12
Warning:
Never connect live or neutral wires to the earth terminal of the
plug. Only fit an approved plug with the correct rated fuse. If in doubt
consult a qualified electrician.
Note:
Always make sure the mains supply is of the correct voltage and the
correct fuse protection is used. In the event of replacing the fuse always
replace the fuse with the same value as the original.
Note:
If an extension lead is required in order to reach the mains supply;
ensure that this too is rated for the correct voltage and fuse rating.
ELECTRICAL CONNECTION….cont
Guarantee:
This SIP MIG welder is covered by a 12 month parts and labour warranty covering fail-
ure due to manufacturers defects. This does not cover failure due to misuse or operat-
ing the MIG welder outside the scope of this manual - any claims deemed to be out-
side the scope of the warranty may be subject to charges Including, but not limited to
parts, labour and carriage costs.
Failure to regularly clean your MIG welder will shorten its working life and reduce perfor-
mance. The warranty does not cover consumable items such as tips, shrouds,
clamps, etc.
GUARANTEE
Note:
Proof of purchase will be required before any warranty can be hon-
oured.
25
WIRING DIAGRAM WELDMATE T126 MIG
