12
version 1.0
14. Information on supplies
When working with the polyamide powder or other designated printer
powder for the SINTERIT Sieve always wear protective kit attached to the
above-mentioned device (glasses, gloves, dust mask).
WARNING!
When working with a polyamide powder, avoid inhalation or swallowing and contact with
skin and eyes.
• If the PA powder is inhaled, move to a place with fresh air and gargle thoroughly with
plenty of water. If coughing develops, contact a physician.
• If you eat a PA powder, rinse your mouth with water and drink 1-3 glasses of water to
dilute stomach contents. If necessary, contact your doctor.
• If the PA powder gets in your eyes, rinse them thoroughly with water. In case of persisting
eye irritation, contact a physician.
• When the PA powder gets in contact to your skin, wash it with soap and water.
• Polyamide powder should be stored in tightly closed containers, in a room at room temperature and low
humidity.
• Powder should be stored out of reach of children and pets.
• If the device is not used for a long time, the powder should be stored in a sealed package.
WARNING!
• Do not attempt to burn/melt polyamide powder. The resulting sparks and hot mass,
the powder is converted into can cause severe burns.
• Keep the polyamide powder away from fire.
STOP!
Do not dispose in municipal waste!
The used polyamide powder should be stored in sealed containers and disposed in accord-
ance with local policy of waste plastic material.