11
www.sinterit.com
ATTENTION!
Never disassemble, modify or repair the power supply, plug or devices inside the sieve,
except as described in the product’s manual.
• The product should be placed near a wall outlet, which can be easily unplugged.
• When an extension cord is used for the power supply of the product, make sure that the total power con-
sumption of all devices connected to it does not exceed the extension cord’s limit. Also, make sure that the
total current drawn by connected equipment does not exceed the ampere rating for AC wall outlet.
• Power cables should be placed in such a place that they are not rubbed, cut, pulled or twisted.
ATTENTION!
• Do not place objects on the power wires.
• Do not place power cords in path where people will have to walk or run.
• Pay special attention to the fact that the power cables are not bent at the points of
connection of the sieve.
• Disconnect the plug whenever it is planned to shift/transfer the machine.
In the following situations, unplug the product from the power supply and contact a qualified service personnel:
• The power cord or plug is damaged,
• Some liquid got into the product,
• The product has been dropped or the case damaged;
• The product does not operate properly or clear changes in efficiency have been observed.
• Do not adjust controls that are not described in the manual.
ATTENTION!
Do not:
• spill liquid on the product;
• put any containers on the equipment, in particular containing water;
• handle it with wet hands;
• block or cover the vents and openings in the product;
• touch live parts.
ATTENTION!
If the device is not used for a long time (e.g. vacation), unplug the power supply from the
socket.
