Vehicle GPS Tracking Device
T229L User Manual
15
The suggested minimal interval for PID report is 10s, for example, 10s of sample rate and 1
group of PID data per message, or 5s of sample rate and 2 groups of PID data per message.
5.6 DTCs Reporting
(CAN required)
Device is able to read vehicle pending and stored DTCs (diagnostic trouble code), and freeze
frame data. The backend server analyzes and displays the DTCs for users on time to avoid
high repairing cost.
5.7 Cell ID Reporting
Device reports Cell ID every 30 seconds when it loses GPS signal, this function is disabled by
default.
5.8 GPS Data Reporting in Sleep Mode
Device reports GPS data according to configured time interval during sleep. The time interval
can be 10-1440min and default setting is 60min.
5.9 Data storage/Supplementary Report in Dead zones
When there is no Cellular signal or Cellular signal is poor, GPS information are stored, and
reported after signal recovery. Supplementary report can be last for 15 minutes at most
after ignition is off.
5.10 Trip Mileage
Device reports driving mileage in each reported message.
5.11 Trip Fuel Consumption
(CAN required)
Device reports fuel consumption in each reported message.
5.12 Driving behavior monitoring
Real-time detects bad driving behavior, including Speeding, high RPM, hard acceleration,
hard brake, excessive engine idle time.
5.13 Alarms and Events Reporting
◇
Ignition on/off
◇
High engine coolant temperature (CAN required)
◇
Speeding
◇
High RPM (CAN required)
◇
Hard acceleration