Vehicle GPS Tracking Device
T229L User Manual
12
OBD communication
: The OBD light change its status to solid on indicates successful OBD
communication/Power on.
GPS function
: The GPS light becomes blinking indicates that device has got its location.
Cellular connection
: The Cellular light change its status to slow blinking indicates registered
network, becomes solid on indicate logged into the server.
Note
:
When device is the first time power on (plugged in), it will scan OBD protocol according to pre-configured
working mode (ie, passenger car or heavy duty mode), the maximum scanning time can be up to 10
minutes, if no OBD protocol is detected during this period, device will auto change working mode to
tracker mode, if OBD protocol is detected, device will keep its working mode. After auto scanning period
device will not change working mode anymore even it is re-plugged, unless working mode is re-configured
with PC Tool, via SMS, or from server. If tracker mode is pre-configured device will not scan OBD protocol
and keep working with tracker mode unless working mode is re-configured.
*If GPS does not work
, please use OBD extension cable and mount the device in a proper place to make
sure GPS signal can be well received.
*If dashboard lights are abnormal after installation, please remove the device and contact Sinocastel
technical team
.
*Do not plug or unplug device when engine is on, this may cause unpredictable problem.
*After engine off device goes into sleep mode, while it still keeps working in order to detect engine on,
the current consumption in sleep is 10mA. Normally we suggest unplug device if vehicle will be not
used for more than 5 days in case of drying out vehicle battery.
Log into
to check real-time monitor and trip reports.
Login
Vehicle monitoring list