Sinoboom AB14EJ, Руководство по эксплуатации

Страница: 45 / 94

PRE-OPERATION FUNCTION TEST
GTZZ14EJ&16EJ Operation Manual 6-9 © Aug 2020
TESTING THE REVERSE DRIVE
FUNCTION
When the rear detection indicator light is lit, the drive
function shall close. Move the reverse drive switch,
the light shall go out and the drive fucntion shall
resume.
NOTICE
When driving reverse, the machine will drive and
steer in opposite direction as indicated.
TESTING THE BUZZER FUNCTION
The buzzer shall give an sound-light alarm at variable
frequency when the following situations occur:
• Main boom, foldabl boom or jib boom down
• Machine overloaded
• Machine tilted
• Length sensor faulted
• Angle sensor faulted
• Other faults
TESTING THE SYSTEM DISTRESS
ALERT FUNCTION
The system distress indicator light will be lit under the
following conditions:
• Failure of weight sensor
• Turntable tilting alarm
• CAN bus error
• Other faults
TESTING THE OVERLOAD ALERT
FUNCTION
When the load on the platform exceeds the platform
capacity, the overload indicator light will be lit.
TESTING THE TILT ALART
FUNCTION
When the machine is tilted, the tilt alarm will sound
and the chassis tilt indicator light will be lit.
NOTICE
When the main boom lifts or telescopes out, the
chassis tilt indicator light goes on, be sure to retract
and lower the boom in place.
TESTING BATTERY LEVEL
INDICATOR
When the battery level is below 20%, the battery
level indicator turns on.
TESTING PETROL GENERATOR (IF
EQUIPPED)
Press the petrol generator switch. The petrol
generator produces AC power to provide power
source for storage battery charging or electric tools.
X
Y
CAUTION
X
Y
CAUTION
X
Y
CAUTION
20%
CAUTION CAUTION
4
7
6
8
9
11
12 13
16
17
19
18
1
4
3
2
21
7
6
8
9
10
11
12 13
15
16
17
19 20
18
5
14