sinmag SM-120a, Руководство по эксплуатации

Страница: 9 / 18

9
When the key is pressed, timers will return to the set time.
5.1.2
INDICATION LAMPS
To show the following operation condition of the spiral mixer.
a) AUTO/MANUAL condition: When AUTO lamp lights up, it is in
AUTO operation.
When MANUAL lamp lights up, it is in MANUAL operation.
b) Bowl direction condition: When lamp lights up, the bowl is
in FORWORD direction, when lamp lights up, the bowl is in
REVERSE direction.
c) Speed Condition: When “
Ⅰ
” lamp lights up, the bowl is in slow
speed condition. When “ Ⅱ ”lamp lights up, it is in fast speed
condition.
d) INCH lamp shows inching condition.
When neither INCH nor ON lamp light up, it is in STOP condition.
e) ON lamp lights up showing ON condition.
f) STOP lamp lights up only when the safety cover is raised.
g) O••L.(Over-LOAD):This lamp lights up when the overload relay
is on. Please remove the fault(voltage drop, mixer overloaded or
cable connection becomes loose ) so that this lamp will turn off.
5.1.3 FUNCTION KEYS
AUTO/MANUAL selection key
Speed selection key
Bowl direction (Forward -0- Reverse) selection key.
When it is set in “F”, the bowl should run in the same direction as the
arrow mark “ → ”on the bowl.
: Start key
: Stop key
: Inching key.
Only the bowl will run while you press this key.
5.2 AUTO OPERTAION
A) Press key below “ Ⅰ ” timer to set the desired time for slow