user uses 2
nd
(TX)and walk near the car, the 2
nd
(TX)will not auto unlock the car.
The user must press button 1 on the 2
nd
(TX) to activate the system. Once the 2
nd
(TX) is in use, the
1
st
(TX) will enter to sleep mode.
Troubleshooting Questions
1. Why I approach the car the doors don't unlock?
First of all, you need confirm EG360 function is enabled, please refer your user manual.
2. Why my spare remote cannot work on keyless entry?
The system will recognize the last remote control which has been activated automatic keyless entry
function; the spare remote control will disable or in the standby mode for automatic lock / unlock
function.
3. How to activate the spare remote control automatic lock/unlock function?
Press the big button for 1 second, parking light will flash 1 second to confirm that it is activated.
4. When do I know that the battery is low?
Arm the system, horn chirp once, parking light flashes 4 times. If disarm, horn chirp twice, parking
lights flashes 5 times. Regular response: when arm the system, horn chirp once, parking light
flashes 1 time, When disarm just parking lights flashes 2 times.
5. When the battery is low, how should I operate ?
The remote key enters passive backup mode while the battery is low and press Button ONE to
unlock.
6. Does any external conditions may impact the EG360?
If your car surround by Low Frenquency signal (e.g at service station), it may result in the EG360
function disable , because transmitter communicate with transponder via an low frequency,
however, you can operate via press unlock button in this condition.
7. Does this systems drain the vehicle's battery?
No, it doesn't. If the transmitter standby excesses 48 hours, it will enters vacation mode, and it
consumes the power in the minimum level.
SINGTECH EG360 Alarm System 4 10170361A
