Singer SG2428C, Инструкция по эксплуатации, Страница: 4 / 16

4
ENGLISH
4. Delicate fabrics such as silk, wool, velour, etc., are best ironed with an ironing cloth to prevent
shine marks.
5. You may have to press a few times to activate the spray and burst of steam functions.
READ THE GARMENT LABELS AND FOLLOW THE MANUFACTURER’ S IRONING
INSTRUCTIONS THAT ARE USUALLY INDICATED BY SYMBOLS SIMILAR TO THE
FOLLOWING:
Temperature control setting
Acetat
Elastane
Polyamide
Polypropylene Polyester
Silk
Triacetate
Viscose
Wool Cotton
Linen
HOW TO FILL WATER
1. Disconnect the iron from the mains supply.
2. Set the steam control to the minimum position.
3. Open the water inlet cover.
4. Fill water through the water inlet hole.
5. Fill up to the ‘MAX’ level marked on the side of the water tank.
Note: Do not use chemically de-scaled water or any other liquids.
SPRAYING
Press the spray button, water will be sprayed out from the spray nozzle. Using this function, you
should make sure that there is enough water in the water tank.
STEAM IRONING
1. To iron with steam, turn the steam control dial to the minimum position and set the tempera-
ture control knob at the “•”, “••” or “•••” position.
2. After the pilot light goes out, turn the steam control dial to the suitable position. Steam will be
produced and ironing can start.