13
The input and output of PANTHER 6KR(XL)/PANTHER 10KR(XL) all available to use
terminal
block, The wiring configuration is shown in the following diagram.
1) Remove the cover of the terminal block;
2) PANTHER 6KR(XL)use AWG10 (5.3mm
²
) wires for wiring configuration; PANTHER
10KR(XL)use AWG10 (8.4mm
²
)
3) Upon completion of the wiring configuration, please check whether the wires are securely
affixed;
4) Put back the terminal block cover to the rear panel.
Figure 3-4 Connection method of terminal block for PANTHER 6KR/10KR(XL)
Caution: Do not connect the loads with terminal block by the personal without qualified training.
