11
3.3 Cable Connection.
3.3.1Connecting Input and Output Cables
1. Input cable connection
If the UPS is connected via the power cable, please use a proper socket with protection
against electric current, and pay attention to the capacity of the socket: over 10A for
PANTHER 1KR( XL)~2KR(X,L)over 16A for PANTHER PANTHER 3KR(XL) over
32A for PANTHER 6KR( XL) and over 50A for PANTHER 10KR(XL), The wiring
configuration is shown in the following diagram.
Mains input
Figure 3-1 Connection Method of Input for PANTHER 1KR(XL)~3KR(XL)
2. Output cable connection
Table 3-2 Output way of UPS
Rating
Model
Quantity of output socket
Output Terminal Block
1kVA
PANTHER 1KR(XL)
2
Nil
2kVA
PANTHER 2KR(XL)
3
Nil
3kVA
PANTHER 3KR(XL)
2
Available
6kVA
PANTHER 6KR(XL)
Nil
Available
10kVA
PANTHER
10KR(XL)
Nil
Available
The output of PANTHER 1KR(XL)/PANTHER 2K(RXL)/PANTHER 3KR(XL) all
available to uses sockets. The total output power shall not 1kVA/0.8kW, 2kVA/1.6
kW,3kVA/2.4 kW
！
6kVA/4.8 kW! 10kVA/ 8 k W. Simply plug the load power cable to the
output sockets of UPS to complete connection as shown in the following diagram.
