manualshive.com logo in svg

Sindoh A1SD Series, Руководство пользователя

Поделиться
Скачать
Sindoh A1SD Series Скачать руководство пользователя страница 33

1

-5

Preparation for Machine Operation

1

3.   Understanding the parts
 

1

9

10

10

5

6

7

8

2

3

4

[ Front ]

[ Rear ]

11

No.

Part Name

Description

1

Power Button 

Press this button shortly to turn on printer.

Press and hold for more than 2 seconds to turn off the printer.

Power Button 

Indicator

Lamp ON

Power is ON

1 second 

interval 

flickering

Can be turned on instantly (power cable is connected)

Caution

- In case of not using the printer for long time, please unplug 

   the power cord.

- The lamp may flicker for a few seconds after power cord is 

   disconnected.

Lamp OFF

Inactive Mode (power cord is unplugged)

2

LCD Control Panel

Screen used to control printer.

Caution

- Usage of printer is recommended after removing the protection film on 

   LCD control panel. 

   If the film is not removed, the touch screen may not work properly.

3

USB Slot

Connect USB flash drive containing printing information and print directly from

USB flash drive.

4

Orange Cover

Access to the operating area

5

Power Port

Power cord connector

6

Speaker

※

Play warning sound.

7

Ventilator Fan

Discharges heat from interior

8

LAN Port

Allows a device to connect to a network using a LAN cable.

9

USB Port   

Used to connect printer to computer with a USB cable.

10

Carrying Handles

Handles to use when moving the printer

11

Power Switch

Turns the power on or off. 

  

※ 

May not be supported depending on model.

Содержание A1SD Series















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды