manualshive.com logo in svg

Sindoh A1SD Series, Руководство пользователя

Поделиться
Скачать
Sindoh A1SD Series Скачать руководство пользователя страница 113

4

-7

Checking Printed Output 

4

1.3  Preparing the Next Print

1

 

Cleaning Platform

    Remove debris of print and contaminants remaining on the platform using an enclosed metal scraper.
    Clean remaining resin on the top and bottom of the platform using a paper towel and IPA.
    Finally, clean all remaining IPA using a dry paper towel.

Metal Scraper

 

Important

  

-  Please remove the platform first, and install it very last.

 

    Resin dropped or splashed from the platform may flow inside the machine.

2

 

Checking the resin tank

    Check the resin tank and clean or replace it, if required.
    For details on how to check and clean the resin tank, refer to “Resin Tank of 5. Maintenance”.

3

  Installing the platform

    Match the groove into the hole at the top of the platform, and fasten the locking screws.

4

 

Closing the machine cover

    Close the orange cover gently and completely with hands.

Содержание A1SD Series















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды