Outdoor unit installation
Electric wiring
(1) Read the name plate carefully,then arrange wiring according to the WIRING DIAGRAM .
(2) A circuit breaker capable of shutting down power supply to the entire system must be installed.
(3) Earth properly.
(4) All wiring must be perfomed by a skilled electrican according to the
WIRING DIAGRAM .Wrong wiring may
cause fire of electric shock.
Connect the power connecting wir es
(1) Remove the front side plate (Fig.11)
(2) Break through the hole for wires and put on rubber bush.
(3) Pull all wires through the rubber bush.
(4) Connect the outdoor unit according to the WIRING
DIAGAM of outdoor unit.Make sure to wire firmly.
(5) Tighten the wires with clamp and clasp.
Note
(1) Earth the units firmly.
(2) W ire the units firmly.
(3) Don’t pull the connector too forcefully.
(5) Connect the other wires properly.
Do not pull the wire when fixing it with
wire clamp and clasp.
Do not let the wire too loose in the outdoor
unit compressor compartment.
Outdoor unit installation
35
36
５
（１）
（４）
