SINBON Electronics Co., Ltd.
4F-13, No. 79, Sec. 1, Hsin Tai Wu Rd.,
Hsi-Chih, Taipei Hsien 221, Taiwan
Tel: +886-2 2698-9999 Fax: +886-2 2698-9660
www.sinbon.com
Status LEDs
Power
When the device is connected to a power source.
The LED is
steady red light.
Database activity
When the device has data transmit to far-end database system,
The LED is steady blue light.
Wireless activity
When the device wireless interface is link to the solar sensor
device, The LED is steady blue light.
Antenna connector
Install the 2.4GHz Antenna, in the package contents item2 5dBi
Antenna.
Reset button
This button is resets the Solar Gateway back to factory defaults.
Ethernet port
This Ethernet port is connect to the "POE "port at the POE adapter,
the POE "LAN" port connector to your network router or connector
to PC or NB can set-up DHCP.
4. Solar Gateway installation.
Installation Checklist
SG-70 Solar gateway: 1 pcs (In the Solar gateway package).
POE adapter : 1 pcs (without attach, the device need to check installation status).
Antenna: 1 pcs (In the Solar gateway package).
Clamp core: 1 pcs (In the Solar gateway package).
Waterproof connector kits: 1 pcs(In the Solar gateway package).
LAN cable: 2 pcs, The one for LAN port and others for WAN port used (without attach, the
cable length, according to the real environment decision).
M4-0.7x12 screw: 4 pcs(In the Solar gateway package).
This document contains confidential and proprietary information, all information are reserved by SINBON Electronics Co., LTD.
5
