SINBON Electronics Co., Ltd.
4F-13, No. 79, Sec. 1, Hsin Tai Wu Rd.,
Hsi-Chih, Taipei Hsien 221, Taiwan
Tel: +886-2 2698-9999 Fax: +886-2 2698-9660
www.sinbon.com
12. Safety Notices.
(1). Follow these instructions.
(2). Heed all warning.
WARING: The installation and repair service should be provided only by a qualified service
technician!
WARING:
The device is not direct for outdoor application. Please the installation conditions must
have at indoors or inside the outdoor control box!
WARNING: Avoid using this product during an electrical storm. There may be a remote risk of
electric shock from lightning!
WARING: Compliance is required with respect to voltage, frequency, and current requirements
indicated on the manufacturer’s label. Connection to a different power source than those specified
may result in improper operation, damage to the equipment or pose a fire hazard if the limitations
are not followed!
13. FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment
must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter
must be installed to provide a separation distance of at least 20 cm from all persons.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Caution!
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's
This document contains confidential and proprietary information, all information are reserved by SINBON Electronics Co., LTD.
20
