SImx LHT0088 Скачать руководство пользователя страница 4

SECTION ONE

GENERAL INFORMATION

The unit utilises passive infrared technology to detect heat radiation of moving human bodies. 
Upon detection, the lamp will illuminate for a user-determined time period. 
An integral daylight sensor ensures night-only operation.

PARTS INCLUDED 

- Luminaire c/w PIR Sensor unit.
- Instruction manual. Please keep safe for future reference.
- Accessory Pack.
- Tungsten halogen bulb

TOOLS & PARTS NEEDED 

- Electric/hand-held drill & bits.
- Terminal or Electricians screwdriver
- Large slotted/philips screwdriver
- Wire cutters

Unit is for outdoor use only.  Unit must be mounted on a non-flammable surface as a fixed
luminaire, and is not suitable for portable use.
The unit can get very hot during use.  Ensure the unit has cooled before handling.
Ensure adequate ventilation space is allowed between the unit and any object above, in front or
to either side of the unit. Suggested space is 0.5m above, 0.3m to either side & 1.0m in front.
If in any doubt, consult a qualified tradesperson or electrician.

SECTION TWO

SELECTING THE LOCATION

The motion detector has a number of detection zones, at various vertical and horizontal angles
as shown (see diagram A). 
A moving human body needs to cross/enter one of these zones to activate the sensor. The best 
all-round coverage is achieved with the unit mounted at the optimum height of 2.5m. 

Careful positioning of the sensor will be required to ensure optimum performance. See diagram A
detailing detection range and direction.

The sensor is more sensitive to movement ACROSS its field of vision than to movement directly
TOWARDS (see diagram B). Therefore position the unit so that the sensor looks ACROSS the
likely approach path.
Avoid positioning the sensor where there are any sources of heat in the detection area (extractor
fans, tumble dryer exhausts etc.). 
Reflective surfaces (ie pools of water or white-painted walls) and overhanging branches may
cause false activation under extreme conditions.

During extreme weather conditions the motion sensor may exhibit unusual behaviour. This does
not indicate a fault with the sensor. Once normal weather conditions return, the sensor will
resume normal operation.

LHT0088&89 251012:lht008889.qxd  10/26/12  5:14 PM  Page 4

Содержание LHT0088













Отзывы: