SIMULINE INC..
19
7. Installation Assembly
●
This product has a complex structures and equipments. Please follow the instructions in this
manual at all times. Misses in assembly may cause electric shock or damages to the machine
and cannot guarantee normal operation in those cases.
●
Make sure there are a crew of 4 or more is available for installation. This machine cannot be
assembled by one technician. If the installation is carried out by one person, accidents or
damages to the machine may occur.
●
Make sure all of the connectors are connected to the proper positions firmly. Insecure
connections may cause malfunctions or electric shocks.
●
Make sure that none of the cables and harnesses are damaged during installation. Damaged
cables and harnesses can cause electric shocks or short circuit.
●
This installation must be carried out by the manager of the store or the service manager. If an
unqualified personnel installs this machine, accidents may occur. Also, if the installation
instructions in this manual is not followed fully, severe accidents may occur to both of the
passengers and workers. If there are no technicians or site maintenance personnel are available
for installation, please contact the office listed in this manual.
●
Make sure that the required space is available for the installation. The space required for the
installation is noted in this manual. Insufficient installation space may cause accidents during
installation.
●
Slanted floor, gaps, elevation difference must be avoided for installation. Cabin or frames may
tip over and cause sever accidents.
●
Do not expose the power cable, earth line and etc where people might walk over them.
Damaged cables may cause electric shocks or short circuits. Use cable floor molds to protect
them.
●
Do not cover the vent at the back side of the MSCU. It may cause overheating and possibly fire.
●
Refer to [2. Installation Location Cautions] prior to the installation. If not enough space is
provided, bodily injuries including even death or damages to the product.
●
When multiple number of technicians are working at the same time, use extreme caution to
prevent any possible collisions and accidents.
Use caution while working with molded parts. Too much pressure can damage the parts. This
may cause injuries.