Simuline AQUARACE EXTREME Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 82

background image

SIMULINE INC..

9

OPERATIONAL FLOOR AREA

●

This product requires at least the space noted below for proper operation. This includes the
consideration for the space for pedestrians and maintenance. If not enough space is
provided, collisions and trouble may happen.

●

3334mm X 2171mm

●

In case any accident occurs while the product is operated on a floor area less than specified,
the manufacturer will not be responsible for any liability or reparations.

●

In case the product cannot fit through the entrance of a location, do not disassemble without
proper preparations. Disassemble only the parts as specified in this manual. Do not attempt a
disassembly procedure not described in this manual. Special tools and adjustment
procedures are required to disassemble/assemble much of the mechanical parts of the
product. Improper disassemble/assemble can lead to accident during disassembly/assembly
such as electrical shock and human injury. If the product does not fit through the entrance
even after the disassembly specified in this manual, contact the manufacturer/supplier or the
contact provided in this manual.

●

This product requires opening of at least 2900mm of width and 1400mm of height to pass
through. Do not tilt the product or subassemblies in an attempt to pass through small
entrances. This can cause accidents during the transportation. In addition, it can cause damage
or deformation to parts and result in accidents during operation.

«
...
8
9
10
11
12
...
»

Содержание AQUARACE EXTREME



















































































Отзывы:

Нет отзывов

Похожие инструкции для AQUARACE EXTREME

Бренд: UNIS Страницы: 51

Бренд: Dahle Страницы: 2

Бренд: LAI Games Страницы: 62

Бренд: GAT Страницы: 27

Бренд: Universal Space Страницы: 33

Бренд: Universal Space Страницы: 41

Бренд: Universal Space Страницы: 42

Бренд: Universal Space Страницы: 39

Lane Master PRO

Бренд: Universal Space Страницы: 41

Бренд: Universal Space Страницы: 41

Бренд: Universal Space Страницы: 42

Бренд: Universal Space Страницы: 65

Бренд: PREO Страницы: 56

Fantasy Forest Bowling

Бренд: Nitto Страницы: 13

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды