5/5
9.1- Couper l’alimentation du moteur pendant 2 secondes.
9.2- Rétablir l’alimentation du moteur pendant 7 secondes.
9.3- Couper l’alimentation du moteur pendant 2 secondes.
9.4- Rétablir l’alimentation du moteur.
Le moteur va tourner dans un
sens quelconque pendant 5 secondes.
Vous êtes en mode «annulation de la programmation».
- Appuyer plus de
7 secondes
sur la touche PROG de
l’émetteur. Le moteur effectue une rotation de 0,5 seconde
dans un sens puis dans l’autre.
Annulation de la programmation
9
9.5- Ensuite valider l’annulation de la programmation du moteur concerné depuis l’émetteur de
commande individuelle :
Utilisation et maintenance
10
- Cette motorisation ne nécessite pas d’opération de maintenance.
- Appuyer sur la touche ▲du point de commande pour faire monter le produit motorisé.
- Appuyer sur la touche ▼ du point de commande pour faire descendre le produit motorisé.
- Quand le produit motorisé est en cours de mouvement, faire un appui bref sur Stop.
Le produit motorisé s’arrête automatiquement.
Astuces et conseils d’utilisation :
Si le produit motorisé ne fonctionne toujours pas, contacter un professionnel de la motorisation et de l’automatisation de
l’habitat.
Par la présente, SIMU SAS, F-70103 GRAY déclare en tant que fabricant que la motorisation couverte par ces instructions, marquée pour
être alimentée en 230V~50Hz et utilisée comme indiqué dans ces instructions, est conforme aux exigences essentielles des Directives
Européennes applicables et en particulier de la Directive Machine 2006/42/EC et de la Directive Radio 2014/53/EU. Le texte complet de la
déclaration de conformité à l’UE est disponible sur www.simu.com. Emmanuel CARMIER, directeur général, GRAY, 11/2016
CONSTATS
Le produit motorisé ne fonctionne pas
CAUSES POSSIBLES
La motorisation est en protection thermique
SOLUTIONS
Attendre que le moteur refroidisse
OFF
2s.
7s.
2s.
5s.
ON
ON
OFF
Si vous intervenez sur l’alimentation de plusieurs moteurs, ils seront tous dans ce mode. Il convient donc
«d’éjecter» de ce mode tous les moteurs non concernés par cette modification en appuyant sur une touche de
commande d’un émetteur programmé.
PROG > 7s.
1
La mémoire du moteur est maintenant complètement vidée. Effectuer de nouveau la programmation complète du moteur.