Simtronics MultiTox DG-TT7-S, Руководство по эксплуатации

Страница: 9 / 59

MultiTox : DGi-TT7-E/O & DG-TT7-S
Page 9 / 60 NOSP 16452-05 (08/2016)
1.7. Detection cartridge
Detection cartridges are:
•
Intrinsic safety “ia” for the DGi-TT7-E- and DGi-TT7-O versions. They can be removed
when the detector is powered.
•
Explosion proof “d” for the DG-TT7-S versions. They cannot be removed when the
detector is powered.
They are common to all Simtronics MultiTox products in order to reduce the number of
spares parts.
•
DGi-RT7-E / DGi-RT7-O et DG-RT7-S: Network versions for Syntel loop,
•
DGi-TT7-E / DGi-TT7-O et DG-TT7-S: « Telecapteur » versions,
Storing electrochemical cartridges (green or blue label) for long periods is not
recommended, as their shelf-life is short. Cartridges should be used within 6 months (from
the date of purchase).
In order to guarantee the metrological characteristics of the device, the cartridges must be
stored in their original packaging until commissioning. For a long-term storage, the
cartridges will be stored in a dry place, between 0°C and 20°C.
After a long storage period, more than one month, the cartridge will be stabilized for several
hours, in order to perform the nominal characteristics.
1.8. Wireless Configuration Tool
Information and status of the detector are available via the wireless configuration tool
TLU600/610.
Configuration and tests are performed using this wireless configuration tool (IrDA protocol).
This tool is common for all Simtronics MultiFlame, MultiXplo and
MultiTox products.
The TLU600/610 provides access to devices that, otherwise, would
require major logistic operations for maintenance or for
configuration (calibration…).
For more details, please refer to the wireless configuration tool
operating manual.
Some versions are equipped with the HART communication protocol, enabling
the use of all functions available with the TLU (see §7)