6
SIMTECH
Phone: 877-777-2467 • Fax: 215-547-9129
www.SimtechUSA.com
1.081210
Weld
Tech -
Hand Held Socket Tool
Notes
•Although the indicator light is off when you
first insert pipe and fittings into the bushings, it
will probably light as soon as the ‘cold’ pipe and
fitting touch the bushings. This is natural and you
can proceed with your weld. Just make sure that
light is off before inserting.
• If at the end of any weld there is any material
left onto the bushing just use a clean wipe to
remove it from the Teflon coated surface of the
bushing.
• If the material is left onto the bushing after all
welds performed check the following:
a) Your pre-heating time (you are heating too
long);
b) Your temperature setting may be too high
(you have a ±10°C window to adjust your
temperature)
WARNING:
This tool operates at elevated temperature.
Direct contact, even brief, with any heated parts
(plates or bushings) can result in severe burns to
unprotected skin.
