Simrad S3009, Руководство пользователя

Страница: 40 / 56

Internal echosounder
When selected, the internal echosounder is available for selection in the echosounder panel
menu.
When unselected, this option disables the internal echosounder in the unit. It will not be
listed as a echosounder source for any unit on the network. Unselect this option on units
which do not have a transducer connected.
Network echosounder mode
The network echosounder mode setting selects whether only one or multiple echosounder
sources can be selected at the same time.
Ú
Note:
Changing the mode requires that all connected sources are restarted.
Restore sonar defaults
Restore echosounder settings to default.
Use depth data from
Select which depth source that shares data on the NMEA 2000 network and on the NMEA
0183 (DPT sentence).
Installation
Source
Select this option to display a list of Echosounder sources available for setup. The settings
you make in the rest of the dialog pertain to the source selected.
Source name
Select this option to set a descriptive name for the selected transducer.
Search depth
Noise may cause the echosounder to search for unrealistic depths. By setting the search
depth manually the system displays echoes received from objects within the set depth
range.
Keel offset
All transducers measure water depth from the transducer to the bottom. As a result, water
depth readings do not account for the distance from the transducer to the lowest point of
the boat (for example; bottom of the keel, rudder or propeller) in the water or from the
transducer to the water surface.
40
Software setup | S3009 Echo Sounder User Manual