Simrad PI32, Руководство оператора, Страница: 44 / 268

Simrad PI32
32
857-164636 / Rev.A
Height presentation
The Height sensor presentation is shown below.
(A) The character and the number identifies the type of sensor,
and which identification number the sensor has on the PI32
system. In this example,
H1 means that it is a height sensor, and
that it is sensor no.1.
(B) Unit of measure. [m] means meter, [ft] means feet, [fm]
means fathoms and [pb] means braccia.
(C) Readout of the actual height between the sensor and the sea
bottom.
(D) Speed of increasing or decreasing depth. The two arrows
(E) are used to indicate if the distance is increasing or
decreasing. If the depth is constant and the speed is 0, the
arrows are removed.
(E) Depth increase/decrease indicators. If the two arrows point
towards each other (as shown in the example), the depth is
decreasing.
(F) Graphic alarm. The direction of the triangle indicates if the
depth should be increased or decreased with regard to the
selected alarm limits. If requested, this graphic alarm may be
accompanied with an audible alarms.
(G) Yellow pulse lamp blinks each time a signal is received
from the corresponding sensor.
(H) Interference warning, activated when the PI32 detects
interference from other nearby vessel(s) operating on the same
channel or with similar hydroacoustic equipment. Contact your
Simrad dealer to select a different frequency should this
problem persist.