Simrad GC80 Compact MK2, Руководство пользователя

Страница: 88 / 156

Simrad GC80/85 Dual MK2 Gyro Compass
988-12720-002 74
Main
Category
Sub
Category
Parameter/description
Default
value
Range
A-2 cont.
2.3.h
Zero-cross bearing (°)
Absolute bearing set for MCU board when zero-cross
pin was passed during start-up sequence (last
azimuth operation) and normal running operation.
Zero-cross bearing can be set in this menu, but is
normally set up by measuring position (angle) of the
zero-cross pin in the Master compass by the test
mode A.
345.3 0.0 - 359.9
2.4.E
Zero-cross error allowance (°)
Zero-cross alarm limit. The compass will generate a
zero cross alarm when the difference between the
zero-cross bearing and the relative bearing exceeds
this zero cross value.
This value should be set every time the zero-cross pin
is detected.
2.0 0.0 - 5.0
2.5.y
Year
Used to set current year.
- 2000 - 2099
2.6.N
Month and Day
Used to set current month and date.
- -
2.7.t
Hour and Minute
Used to set current hour and minute.
- -
2.8.d
Total days of operation
This value should be reset after the installation is
completed.
- -
2.9.G
Display/setting of GPS connection
The following abbreviations are used:
bE: GPS connected
Non: No GPS connected
NOTE: When this value is set to “Non”, GPS cannot
be selected as the vessel’s input for speed
and latitude.
- bE or Non
2.A.L
Display/setting of LOG connection
The following abbreviations are used:
bE: with Log (contact)
Non: No Log (contact)
NOTE: When this value is set to “Non”, LOG cannot
be selected as the vessel’s speed input.
- bE or Non
2.b.S
Display/setting of LOG (serial) connection
The following abbreviations are used:
bE: with Log (serial)
Non: No Log (serial)
- bE or Non