CR40/42/50 MKII Waypoint/route menus
Chapter 5
63
upper drawer, and [3] for the lower drawer.
You now have a choice of:
[1] DataCard status
[3] Save on DataCard
[9] Load from DataCard
DataCard status
1
Press
[1]
to find out what data (if any) is stored on the DataCard
The capacity is divided into two databanks: DATABANK 1 and 2
which can hold approx. 2 x 450 Kb data. Toggle between the two
databanks with the +/- zoom keys.
Save on DataCard
3
Press
[3]
to call up a new INFO window
where you can see which data
will be transferred i.e. how many routes, waypoints, etc. and how much
space it will take up in bytes + percentage of max. storage capacity.
Choose which databank you wish to transfer the data to (use the +/-
zoom keys).
The actual date and time will be saved with the data transfer.
A name can be added for easy identification later on.
ENT
Press
[ENT]
to activate ‘Save on DataCard’
)
You will now receive a warning that existing data on the DataCard,
in the databank you have chosen, will be overwritten. You can not ‘add
more information’ to data already transferred. Whenever transferring
data either from an XX40/42/50 MKII to Databank 1 or 2 on DataCard,
or from Databank 1 or 2 on DataCard to an XX40/42/50 MKII, the data
package will replace the entire capacity in the receiving unit, except
when a TL50 Turbo Loader is connected to the unit, then you can
decide how much data you want to transfer - refer to TL50 manual.
Load from DataCard
9
Press
[9]
to call up a new INFO window
where you can see which data
is stored in Databank 1 or 2 on the DataCard - see example of display
on next page, without TL50 connected.
Содержание CR40 MKII
Страница 50: ...CR40 42 50 MKII Position menus Chapter 4 50...
Страница 120: ...CR40 42 50 MKII Installation and service Chapter 9 120 Other important settings continued...
Страница 160: ...CR40 42 50 MKII Glossary of terms Appendix A 160...
Страница 174: ...CR40 42 50 MKII DGPS ChartRadar Index 174...
