Simrad 398445, Руководство по установке, Страница: 7 / 66

404776/A
5
About this manual
Purpose of manual
The purpose of this manual is to provide the information, procedures and basic drawings
required for the physical installation of the Simrad ES38-18/200–18C Combi transducer.
The manual further provides relevant descriptions and illustrations to explain the basic
principles for location and noise considerations.
Target audience
The manual is intended for technical personnel; such as skilled shipyard workers,
electricians, qualified engineers and naval architects. It is assumed that you understand the
general principles of maritime electronic equipment. You must also be familiar with the
installation of electronic and mechanical products.
Installation instructions and drawings
The information in this document must be regarded as general guidelines and
recommendations only. The installation shipyard must design and manufacture installation
hardware to fit each individual transducer and vessel.
Note
The installation shipyard must provide all necessary design and installation drawings, as
well as the relevant work standards and mounting procedures.
If required, these documents must be approved by the vessel’s national registry and
corresponding maritime authority and/or classification society. Such approval must
be obtained before the installation can begin. The shipowner and shipyard doing the
installation are responsible for obtaining and paying for such approval.
Simrad will accept no responsibility for any damage or injury to the system, vessel or
personnel caused by equipment that has been incorrectly installed or maintained, or by
drawings, instructions or procedures that have not been prepared by us.
About this manual