Simrad 398445, Руководство по установке, Страница: 39 / 66

404776/A
37
The table and illustration show the termination of the transducer cable from a
ES38-18/200-18C transducer to a GPT type transducer socket.
The other end of the cable is permanently fixed to the transducer.
The cable screen must be connected to the housing on the transducer plug and to terminal
N
.
If a junction box is used to extend the transducer cable, the screen must be connected to the
cable glands on the junction box. The screen must not be connected to vessel ground.
Note
The black wires in the transducer cable are not for grounding. You must never connect these
together, and you must not connect any of them to vessel ground.
If you need to splice the transducer cable, it is very important to use the correct cable. You
must also avoid ground loops. We strongly recommend the use of a junction box. The
junction box must be made of metal, it must be provided with proper cable glands, and it its
chassis must not be connected to vessel ground.
You must install the transducer cable in a steel conduit.
Cable specifications
Not applicable. If you need an extension cable, contact your dealer - or Kongsberg Maritime
support - for advice.
Related topics
GPT Transducer plug, page 38
Transducer ES38-18/200–18C connection to other transceivers, page 39
Installing the transducer cable, page 24
Splicing the transducer cable, page 32
Connecting the transducer cable to the transceiver, page 33
Cable layout and interconnections