Simrad 000-15567-001, Инструкция по эксплуатации

Страница: 63 / 114

INSTALLATION
20221511 / D
55
2
Press the
DISP
button once to display main category
A-2
.
3
Press the
SET
button to enter the sub-category
2.1.o
.
4
Use the arrow buttons to increase or decrease the offset
parameter value.
Note!
To correct for +1.5°, press the Arrow Up button until the
display shows 1.5°.
To correct for -1.5°, press the Arrow Down button until the
display shows 358.5°!
5
Confirm the new value by pressing the
ACK/ENT
button,
or reject the changes by pressing the
SET
button. The
display will return to sub-category
2.1.o
.
6
Exit the Extension menu by pressing and holding the
SET
and
ACK/ENT
buttons simultaneously for at least 3
seconds.
For further information about the Extension menu, refer
Using
the Extension menu
, page 58 onwards.