Simrad 000-15567-001, Инструкция по эксплуатации

Страница: 44 / 114

Simrad GC80/GC85 Compact Gyro Compass
36
20221511 / D
5.1 Unpacking and handling
A GC80/85 Gyro compass consists of the following units:
- Master compass
- Sensitive element
- Control unit
- Power Supply unit (Option)
- Spare part kit
- Documentation
The sensitive element is shipped from the factory packed
separately in a carton box to protect it from excessive shock and
vibration. The final assembly of the sensitive element into the
Master compass have to be done when the Master compass is
mounted onboard the vessel. Refer page 44.
Note!
It is strongly recommended to keep the packing material for the
Sensitive element. This original packing should be used if the
element is sent to the factory for overhaul or repair.
Care should be taken when unpacking and handling the
equipment. A visual inspection should be made to see that the
equipment has not been damaged during shipment and that all
components and parts are included.
5.2 Mechanical installation
The units included in the GC80/GC85 system should be
mounted with special regard to the units’ environmental
protection, temperature range and cable length. Refer Technical
specifications, page 65 onwards.
Note!
A special tool (part no. 44174449) is required when installing
the Sensitive element. This tool is included in the gyro package,
and the sensitive element should not be installed without using
this tool.