Simpson SWT1012A, Руководство пользователя

Страница: 16 / 24

CARING FOR YOUR
WASHING MACHINE
Simpson Caring for Your Washing Machine
13
What to do after you have finished your washing
How to Clean the Lint Filter
Your washing machine will give you long and
trouble-free service, if you follow the instructions
in this section. These instructions show you how
to care for your washing machine.
Press On-Off switch to switch off the machine. 1.
Turn off the water taps. This will extend the life
of the inlet hoses.
3.
Leave lid open for a while. This allows time for
moisture inside the washing machine to
evaporate and for any odours to disperse.
4.
Remove the lint filter out from its housing. 1.
Reassemble the filter to the housing. 4.
Open the lint filter. 2.
Clean the filter under the water tap with an old
toothbrush.
3.
Switch off the electricity at the power point. 2.
The dispenser needs to be cleaned regularly,
preferably after each wash. Inspect the dispenser
after each wash to see if there is any residue of
detergent.
To do this proceed as follows:
Cleaning the Dispenser
Pull the dispenser drawer forward until it stops.
Lift the front of the drawer up and forward to
remove it from the runners.
Clean the dispenser drawer with hot water and
a brush, eg. an old toothbrush.
Dry the drawer.
Before replacing the dispenser back in its recess,
clean the inside of the drawer with an old
toothbrush.
Put the dispenser back into its runners and close
the drawer.
Housing
Filter
The lint filter needs to be cleaned regulary,
preferably after each wash. Inspect the lint filter
after each wash to see if there is any lint collected.
To do this proceed as follows: