Simpson SWT1012A, Руководство пользователя

Страница: 14 / 24

Simpson Using Your Washing Machine
11
If you touch Start/Hold To Pause during a spin stage
and you want to open the lid, you must wait until
the lid is unlocked when the padlock symbol “ ”
on the screen will disappear.
Start/Hold To Pause Button
The Start/Hold To Pause button is used to
start, stop or continue the wash program.
If you have started your wash and you wish to stop
it for some reason, press the Start/Hold To Pause
button and hold it for minimum 1.2 seconds to
enter pause mode.
Lid Locked ( )
The padlock symbol is displayed on the screen
to advise you when the lid of the washing machine
is locked in the closed position. The lid will be
automatically locked when the washbowl is spinning
during a wash program. To fill and agitate the lid
must be closed, but will not be automatically locked.
If the lid is open and the machine is waiting for it to
be closed for the wash program to continue, you
will see in the digital display accompanied by
‘beeping’.
Should you need to access the washbowl during
spin, set the washing machine to PAUSE by press
and hold the “Start/Hold To Pause” button for 1.2
seconds. You will have to wait a short time for the
bowl to stop spinning before the lid unlocks and the
padlock symbol “ ” on the screen disappear.
If then you open and close the lid, and the machine
is still in a spin stage of the wash program, the lid
will lock and the machine will continue to complete
the spin stage.
DO NOT insert anything into the lid lock slot in
the top panel of the washing machine.
DO NOT interfere with the lid lock mechanism
to try and disable it or otherwise change the
way it works.
DO NOT try to force open the lid when it is
locked.
Caution
Before you start the program , this option
makes it possible to define the end of the washing
program by 2, 4, 6 or 8 hours.
This option must be selected after choosing the
wash program, and before touching the “Start/Hold
To Pause” button.
If after having set the Delay-End option (and
Touched “Start/Hold To Pause” button) you wish
the cancel or modify it, follow the below steps:
set the washing machine to PAUSE by press
and hold the “Start/Hold To Pause”
button for minimum 1.2 seconds
Delay End Option
1.
Touch the Delay-End option, changing the status
of delay times.
2.
Touch the “Start/Hold To Pause” to start the
program.
3.
By touching Delay End button, then touch the
modify option buttons ( , ) to choose the end
time as your wish.
This mode permits you to either enable or disable
the beeping (3 beeps every 4 minutes) at the end
of the wash. As an example, you might wish to
disable this beeping when you start a wash when
going to bed, so that when the wash finished
approximately 1 hour later, it will not disturb you
through the night.
Enabling/Disabling End-of-Wash
Beeping Mode
NOTE: All error beeping is not disabled by
this feature, such as a critical fault, or lid
open during fill/agitate/spin, or out of
balance during spinning.
To change the “beeping” selection:
NOTE: If you do not press a button within
5 seconds the washing machine will return
to the previous setting. To reprogram,
simply repeat the above process.
Press the “Modify Option ( , )” button to
change the selection, then press the Start/Hold
To Pause button to store the new selection.
2.
When the washing machine in STAND-BY-
MODE or PAUSE MODE, press and hold
“Start/Hold To Pause” button for about 3
seconds to enter Enabling/Disabling End-Of-
Wash Beeping mode.
The digital display will show “ ” when
the end of wash beeping is disabled.
The digital display will show “ ” when
the end of wash beeping is enabled (this is the
default factory setting).
1.