T-SAS-GCNM12 ©
2012 Simpson Strong
-T
ie Company Inc.
-10-
LOADING THE GCN150 MAGAZINE WITH GDP STRIP PINS:
1. Slide up to (4) strips of GDP pins into the
magazine
2. Pull back the pin feeder boot to the back of
the magazine
3. Release the pin feeder boot behind the
last pin. The feeder boot will automatically
retract and engage the pins
gENERAL OPERATINg INSTRUcTIONS fOR THE gcN150
gAS-AcTUATEd TOOL
The magazine is designed to retain two pins during use to prevent the tool from
discharging without a fastener (which can damage the tool and possibly cause injury).
The tool will resume normal operation when additional pins are loaded.
